Kupa Inc.

Starter Kit w/ UV-LED Lamp (White)

GEL-LAMP-DIPKIT-BUNDLE-WHT

$234.95
  • Starter Kit w/ UV-LED Lamp (White)

Kupa Inc.

Starter Kit w/ UV-LED Lamp (White)

GEL-LAMP-DIPKIT-BUNDLE-WHT

$234.95

Description

GelFinity Hybrid UV/LED Lamp WHITE + DipFinity Starter Kit Bundle 

*NO PROMO CODES VALID WITH THIS BUNDLE!

Includes one each:

GEL-LAMP-WHITE

The GelFinity Hybrid UV/LED Lamp comes in Black or White color. It is a powerful 36 Watt UV/LED lamp that was developed exclusively for KUPA Inc. to cure both UV and LED products. So you never need to worry about compatibility issues. For your customers comfort there is a built-in arm rest to relax during their service. The built-in timer allows you to conveniently select 10, 30, 60 or 90 seconds to adjust your drying times to other polish or gel products. The lamp includes an automatic motion sensor that will activate the light when customers place their hands into the lamp. The lamp comes complete with auto switching transformer that is compatible with both 110 or 220 volt power sources. (110 Volt is standard for use in the USA, 220 Volt is common in UK & the EU). The GelFinity Hybrid lamp also features an easy off magnetic bottom for convenience when drying pedicures. There is a 1 Year Part and Labor Warranty for manufactured defects.

 

KP-DIP-STARTER-KIT

DIPFINITY STARTER KIT VALUED OVER $79 USD

DipFinity Dehydrator #1 - Essential for a long lasting bond. Apply DipFinity Dehydrator nail prep to the natural nail plate to deep clean pH balance and temporarily dehydrate. Designed to gently lift out moisture, oil and contaminants. Use DipFinity Dehydrator #1 before DipFinity Primer #2 is applied to enhance retention and extend life.

 

DipFinity Primer #2 -  Creates union between nail & DipFinity product. DipFinity Primer #2 is strong but gentle, a superior bonding agent that works without the harsh acids that can burn or irritate cuticles and skin. Apply one coat to create a strong loving bond between nail keratin and DipFinity extension product

 

DipFinity LED/UV Adhesive Step #3 -  Apply a thin even coat of adhesive to the nail, dip in the TripTych colored powder of your choice.  Apply another thin layer of adhesive, dip in the TripTych colored powder for a second coat.  Cure for 1 minute in LED lamp or 2 minutes in UV lamp.  Finish with DipFinity TopGloss Step # 4. KUPA's DipFinity LED/UV Adhesive Step # 3 provides superior adhesion to the nail plate while providing complete color coverage to the nail once dipped in your choice of TripTych colored powders.  Out with the old way of dipping with cyanoacrylate and In with the new LED/UV Adhesive from KUPA!  A nail dip system you and your clients are sure to love!

For use after Step #1 DipFinity Dehydrator & Step # 2 DipFinity Primer

Use DipFinity LED/UV Adhesive Step # 3 with any TripTych Colored Powders: https://kupainc.com/collections/colored-powders

 

DipFinity LED/UV Top Gloss Step #4 - Soak-off Gel TopCoat completes the DipFinity system with step#4.  DipFinity LED/UV Step #4 finishes to a high gloss shine that will not fade, chip or peel. Cures to a no-wipe finish. To remove soak-off with acetone or polish remover. Cures 90 seconds in your KUPA GelFinity UV/LED Hybrid Light or 2 minutes in a standard UV Light.

 

To Remove: Soak in acetone until soft then gently remove with a metal pusher.

 

Included in the DipFinity Starter Kit are 2 TripTych Colored Powders in full 1oz sizes!  40 colors, with 5 complete collections to add to your line of DipFinity colors!  You will receive two perfectly paired shades in your DipFinity Starter Kit to create beautiful DipFinity nails.